repairs to upvc windows (his explanation)

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like aluminum or timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken glass repair

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into old frames very easily. However If you have double glazing repairs near me pane windows that are anchored by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need to find some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows so you can reach the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fit. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it blows open with the breeze. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's easy to change a window hinge but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to provide advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also stop corrosion and reduce the possibility of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, creating gaps where the sash meets frame. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to have them re-aligned or replaced. The interlock may be unbalanced. This happens on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace them.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a little maintenance and glazing repairs near me your windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.