Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double glazed window repairs panes are joined by internal beading, it is harder to remove and replace the old panes. In this case you'll need to locate some plastic spacers to help the new pane to fit perfectly into the frame of the window repairs.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may develop a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window repairs near me is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can get to the frame. With an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws until they remain in position.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your upvc window repair near me windows are watertight and secure from draughts.

UPVC handles can also loosen. The majority of the time it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close the window and perform an experiment to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double glazed window repairs glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with the breeze. These are easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Like all mechanical parts hinges will wear out over time. It's very simple to change a window hinge, but it's easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain manner or because of poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are happy to provide assistance.

It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also become unbalanced due to wear, causing gaps where the sash meets frame. If they are damaged beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become misaligned. It is located on the hinge's side, and could require to be cleaned. In certain instances it is possible to replace the hinges.

The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be positioned on the windowsill on top. They will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.