Door Handle replacement double glazing handles

It's worth it to replace door handles if you aren't happy with the way they look, or if they're difficult to use. With a little patience, you can put in a new handle in no time.

Modern door handles are usually equipped with cover plates that hide the screws to give them a more attractive appearance. However, you'll need to attach them separately if the new handle does not already have them.

Removal of the Old Handle

Door handles aren't just an an important aesthetic addition to your home but they're also essential for security as they let you lock and unlock your door. However, as time passes, your door handle may lose its grip, appear loose, or appear old and worn. This is a clear indication that it's time to replace the door handle.

One of the first signs that your door handle needs replacing is when it becomes difficult to operate. This is a serious issue because you won't be capable of locking or unlocking the door and put your family and yourself at risk.

Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be dangerous, particularly for elderly and children members who might struggle to open it. They could be trapped. It's a good thing that it's simple to fix a damaged patio door handle handle by simply replacing the old one.

Most modern door handles are standard size and therefore are suitable for any door. If you're not certain if your new door handle will work, take off the old one and take measurements of its holes in the housing. This will help you buy the right door handle.

It is the easiest method to remove the old door handle by removing it from the door. This is usually done using a screw driver. However certain door white window handles come with the cover plate which hides the mounting screws so you'll need to pry off this cover plate to get access to the screws underneath. After you have removed the old handle, take note of the way the spindle has been connected. This will aid in aligning the new handle.

You can also remove the door handle by unscrewing the latch mechanism. This is usually done with a screwdriver but you'll need to locate the small latch, which should be just to the left of the trim piece. After you have removed the latch, take the handle off the strike plate and then the latch off the door's edge.

Removal of the Strike Plate

When you replace your handle, you'll also be required to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The package the new handles are packaged in will have two latch plates: a rectangular one and a circular one (see the diagram above detailing door handle parts). If you have an rectangular latch plate, swap it with an oval one. This will allow the latch to hook onto the strike plate and make the handle more convenient.

The first step is to loosen the screw that holds the latch plate in place. The screws are often quite tight and require a lot of force to loosen them. It might be beneficial to have a second person assist with this part if possible.

After the screws are removed the latch should pull out of the door easily. If the latch plate is stuck or won't move, use a small hammer to scrape the edges. This may help free the plate.

You can now move on to preparing the new door strike plate to be installed. Attach the latch plate to the door jamb using the screws that came with your new handles. Be careful not to over-tighten the screws, as this could cause damage to the strike plate.

If you're unsure whether the latch plate is in the proper position, close and open the door to see whether it locks and closes properly. If it doesn't then you'll have to adjust the strike plate either up or down, or move it forward or back until the door closes and latches correctly.

If the door is still moving or jiggles, then you may have to expand your latch hole on the strike plate. This is more common in older doors, however it could also be caused by wear and tear, hinge mortises that are too narrow or the wrong size for the latch, or because of a broken or damaged strike plate. If this is the case you can use a metal file instead of a chisel, or hammer to adjust the strike plate.

Take off the Latch

The latch is a bent metal piece which slides in and out of a hole in the inside of your door. The latch is moved forward when you turn the handle. It also hooks into a hole in the frame of the door to keep the door closed. If your door is wobbling when you close, an upgrade to the latch could be all that is needed to correct the issue.

It's difficult to identify the screws that secure the latch to the door, but there's usually a tiny slot on the trim plate that permits you to insert a screwdriver into the slot and pry it off. After removing the trim plate, you should be able to remove the latch as well as the bolts that hold it in place and the spindle in position.

If the latch won't release it is suggested to use a paper clip or a tool to free it from the handle mechanism. Insert the item into the recessed latch slot and gently turn or jiggle it until you feel the handle and latch start to separate. It may take this several times before the latch comes loose enough to allow it to be pulled out.

It should be possible to slide the new latch into its slot with no issues once you have removed the old one. Use your new screws to connect the latch to the strike plate or door frame. Make sure that it is correctly positioned in the slot, and aligned with the screw chambers.

Check the backset of the current handle (the distance between the center of the large hole on the door's front and the edge) before installing the new handle. Check that the latch size of the new handle matches the measurement.

If you're replacing the handle or latch or handle, or if your previous lock cylinder is damaged, then you will need an entirely new one. If you're not switching locks the new lock should fit inside your existing recess and will work with the keys you have already. Make sure you select a latch with a rectangular cover plate that match the handles you have.

Then remove the Cover Plate

You can replace your door handles with a contemporary design of roses and levers to enhance the appearance of your house. You can purchase complete sets of escutcheons, privacy adaptors, escutcheons, and escutcheons.

To replace an internal door handle take off the cover plate (or rose) that protects the screws and the inner mechanism. Utilize a flathead to take off the cover plate. It could have an opening on one edge or be secured by pins.

Once the cover plate is off take off the screw that holds the inside handle in place, and then set it aside. Remove the screws that secure both the outer and inner plates. You can loosen them with the help of a Philips Screwdriver. Take the inner plates and latch from the door. Put them away.

Most doors have an opening between the door jamb and the edge of the frame, which allows for a handle, but not all do. If yours does not have a handle, you'll need to drill a new hole into the door. The process for doing this is the same procedure opening a aluminium door handles using the lock, however you'll be taking extra care not to damage the door or frame.

After the holes are drilled then you'll need to install new door knob screws. Make sure to buy the same size as the previous ones, to ensure that you do not end up with a handle that's too tight or too loose. You'll also have to install a new latch plate and strike rod, which aren't included with most door handle sets.

If you're looking for a quality replacement set of interior victorian scroll door handles handles look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit and has received a plethora of five-star reviews from satisfied customers. It's an excellent option for replacing worn out or damaged door hardware on your Chevy.