UPVC Replacement Door Handles

As time passes the handles on your doors will wear down and will require replacement door handles. When doing this it is important that the new handles conform to the critical dimensions of the handle that was previously used.

The top screw's position the lever, and the keyhole size are the three measurements that you need to verify. Use the size guide to aid you.

Inline Lever/Lever

A lever handle is a contemporary door handle that is designed to fit new or replacement upvc window handles doors. This kind of handle is available in many styles and finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles made of uPVC/Composite are made from robust materials, and are perfect for doors with multiple points that require a robust design. The handles are inline and use the same spindle and screws to fix them. They can be easily mounted on new or existing uPVC/Composite door.

The handle can be placed and angled to accommodate any user. The handle has been tested for endurance up to 200,000 cycles. This ensures that the finish is of high quality and performance over time. The sprung lever is also adjustable to accommodate a wide range of locks. This is useful for doors with narrower openings where the cylinder is further back from the door. A shortened lever is also a good choice for doors where the latch can be operated by a thumb turn inside.

Lever Pad

A Lever Pad door handle made of upvc operates differently from lever-type handles that are found on the majority of doors. These handles are operated by one spindle or two spindles, inline or offset. They are commonly used on UPVC doors with double glazing. They are available in a range of finishes & variations.

The handles have been tested to the minimum of 200 000 cycles and are available in several finishes like White Silver, Chrome, & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high degree of durability and performance for the intended use.

All of the UPVC lever pad designs come with a spindle and screws which allow them to be installed on a new or existing uPVC door. The 211mm backplate fixing centres allow for a wider handle, which can often be a benefit when replacing a damaged or worn multi-point door handle repair near me lock mechanism. These handle levers have a spring, which solves the issue of door handles that sag out of horizontal position when they are not being used.

When choosing the replacement UPVC handle and spindle it is crucial to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement is also referred to as the handle centre or 'cylinder centres' and is a critical aspect in ensuring that you have the correct handles.

Once you have the proper PZ size you will then be required to make sure that the lever pads and push pads are of a suitable shape for the American with Disabilities Act (ADA) approved handles you require for your doors. These are typically square or round with an internal lever, and an external push pad.

The majority of the UPVC Lever Pads that we offer are sprung. This means they can be reverted to a horizontal state when not being used instead of hanging, and possibly being stuck in the frame. This stops draughts and cold air from entering a home. It is also the case that the majority of UPVC lever pad handles are handed which allows you to place them on either side of the door.

Euro Cylinder

Cylinder locks are usually found on uPVC doors, but can be utilized on other types of doors. They operate with a key to unlock a cylinder that is then revealed with pins that can be aligned with the pins in the lock body, allowing them to turn an revolving cam, opening the door. Euro cylinders can be fitted with up to six pins with external and internal doors typically requiring different levels of security.

The choice of cylinder you choose is vital. It's dependent on the use that your doors and handles receive. For example, external doors should be fitted with a more secure cylinder whilst internal doors can be secured with a standard cylinder. Some cylinders have extra features that can improve security, for instance, anti-drill or anti bump properties.

To ensure that the euro cylinder is the right size for your door, it must be measured correctly. The cylinder needs to be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is recommended to do this with the lock in place however if this is not possible, you can remove it to take measurements. A cylinder that protrudes beyond the handle and escutcheon might be vulnerable to attacks such as snapping locks, therefore it is important that it's not too long.

The majority of modern cylinders have been constructed with anti-drill and bump resistance features that are built into their design. They are designed to decrease the chance of attack by forcing cylinders to turn in a new direction. This can help stop the attack and keep your doors safe.

Some cylinders are designed to withstand snapping. This is a more frequent type of attack on cylinders, where the break line in the lock is targeted by a tool that is specially designed to snap off the front of the cylinder and allow the door to open. This is a quicker and easier way to gain access than using a multipoint locking system. It also leaves less evidence of the break-in which can make it difficult to prove insurance claims.

Spring Cassette

The spring cassette is situated inside the base plate of the door handle. It offers a spring-loaded solution to help return your multipoint lock handles to their resting position after usage. The handles were previously equipped with no spring and would droop when the locking mechanism was disengaged. This simple part is the best solution to fix this problem. It also stops your door from becoming stuck in the open or closed position as they aren't easy to close manually.

These spring cassettes have been specifically made for use with multipoint locks that are sprung but they won't work with non-sprung multipoint handles. You will need to have a hole specifically cut in your backplate to allow these to fit (please look at the image for a technical diagram). These cassettes are a solution for damaged or missing cassettes in the backplate of uPVC door handles. They feature a square cut out which can accommodate an 8mm spindle, and they are supplied individually.

These spring cassettes offer an excellent value solution to the issue of door handles that are sagging. They are easy to fit and will increase the life span of your uPVC doors. Please contact our team to learn more about our wide range of uPVC accessories and spares. We are here to assist and offer expert advice.