Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. However If you have double pane windows that are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of onto the floor, where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will prevent water and drafts from entering your property until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues, including sliding. A window repairs near me that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you realize that your upvc Window repair windows are sagging.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to shut the window repair and do an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window repair near me leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with the breeze. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It's easy to change the hinges on a window but it's much easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, causing an opening where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could also become misaligned. This happens on the hinge's side, and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next most common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and they may reach an point at which it is more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.