Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this case you'll need find some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of issues, including sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act when you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window to get to the frame. After that, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for an appropriate fit. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window repairs waterproof and draughtproof.

uPVC handles may also loosen up. Often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform a test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze, it may be hinges that are at the fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It is very easy to change a window hinge, but it's simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are happy to provide suggestions.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your upvc window repairs near me window.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, causing gaps between the frame and sash. If they are damaged beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it is possible to give them a clean but in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc Window Repair will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.