Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement handles for upvc windows window handles are easy to fit and feel as good quality. However, it is important to realize that the type of handle you select is the one that's right for your window screen replacement.

The most important aspect is the step height which refers to the gap beneath the handle's nose to the base or frame. Other considerations include lockable designs and mechanisms.

Replacement parts

There is a variety of replacement window handles made of upvc available for purchase. There are numerous styles and colors to choose from, so you're sure to find something that matches the windows you have. It's easy to impulse buy especially if the handle fails, so it's best to look over some things before you commit to purchasing a new one. First, you need to know what type of handles made from upvc you have and what the differences between them. The table below shows the most common handles to help you identify the one that is suitable for your windows made of upvc.

The majority of double-glazed windows today come with handles for epag. They are typically attached to the frame using two screws that are screwed in from above and below.

They have a spindle bar at the back, which can be of a variety sizes and this will determine the way they operate (either left or right handed). It is important to determine the measurements of the handle you currently must ensure that you purchase the right replacement.

Usually fixed with two bolts, similar to the Espag handle but they have a lower projection from the frame which means that the arm will not poke through your blinds. This is a great option when you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles but they have a nose that closes over a wedge, which is placed on the frame of the window. This type of handle is available on a few older wooden and Upvc windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing the top of the window. This opens the window from the inside, allowing you to clean from outside without having to climb out onto a ladder or walk over the fence. They also make a great option for those with limited mobility. They can be a great way to improve security and accessibility within the home.

Tips and suggestions and

There are a variety of different types of uPVC window handles, and a lot of people will need to replace them at some point. It is important to know a few tips and tricks to aid in the process.

The first thing you should do is check what type of handle you have at home. Depending on the kind of handle and the locking mechanism, it might be necessary to replace the handle and lock. If the roller cams and shoot bolts (espags) are blocked or getting stuck, you'll need to replace them, along with the handle.

Thankfully, the majority of uPVC handles adhere to industry standards and are very similar. This makes replacing them a relatively easy process. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. Once these are removed, you are able to remove the handle.

It's a great idea note how much the spindle protrudes from the base of the handle after you take it off it. This will allow you to determine the length of the spindle when you are looking for a replacement handle. To do this, simply determine the length of the square peg that sticks out from the top of the handle, and use it as a guide.

This is particularly important for inline uPVC window handles as they are always straight and open left or right, and will not operate in the middle. It is a good idea if you're not sure of the type of handle you have at your home, to borrow a handle and check out how it functions.

Another excellent method to figure out what the handed of the uPVC window handle is is to look at the way the handle moves when it is operating. Handles can be turned either clockwise or counter-clockwise. If you're unsure it's possible to ask someone else to open the window using the handle, and figure out how it operates in that way.

Take a measurement cost of replacement windows uk the spindle

It isn't easy to select the appropriate replacement window locks handle for your window as there aren't all handles that have the same dimensions. The spindle is the mechanism that locks the window. It is crucial to ensure that when installing a new handle, you measure the length of the spindle precisely to ensure that it fits. There are numerous kinds of uPVC handles that operate in various ways. It is essential to determine which one you have, and what locking mechanism you are using.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, this turns the lock inside the gearbox, and opens the window. They are generally utilized on uPVC casement windows. They can be locked with keys to give extra security.

Cockspur handles have a "nose" that closes over an elongated striker block that is placed on the frame. They are commonly found on older double-glazed uPVC windows. They are also relatively easy to install and can be locked with keys. It is more difficult to replace these handles because they are not as popular as the handles with espagnolette.

If you have a tilt and turn uPVC then you'll require a new handle that has an alternative locking system. It will be able to open the window, but also turn it back and forth to fully open it. You must choose an opening handle that has an opening of at least 55mm in order to be able reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. But, you'll have to be careful when removing it. You may have to open the window a little larger than usual to ensure that you can get to both screws fixing it to the frame. After you have installed your new uPVC handle and verified that it is in the right position, then you can tighten the screws, and test the lock to make sure it functions properly.

Install the new handle

When you have the proper handle replacement glass for window it can be screwed into the right place. It will require a screwdriver and an electric one may be easier. When screwing in place it is crucial not to over tighten the screws, as this could cause the handle to warp or crack.

The second step in fitting the new handle is to install the spindle. The spindle is the part which runs through the handle to control the locking mechanism inside the window. It is important that the component is properly fitted to allow the window to open and shut securely.

There are a variety of different kinds of uPVC window handles. They include:

Espagnolette Handles - these are inline handles that can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curved design that can be useful for windows that are difficult to reach.

Tilt and Turn Handles - These are used on tilt and turn windows to operate the opening and closing mechanisms.

These are the most common and the majority of uPVC windows have them in place. They are often called 'Bay Windows' in the UK.

If your uPVC window handle is broken it can be extremely frustrating. There is no need to change the entire uPVC window because of a damaged window handle. There are a number of easy ways to repair and replace a broken uPVC window handle.

By identifying the kind of window you have, measuring the length of the spindle and buying an appropriate handle, you can easily fix your broken window handle. When working with windows and tools, it is important to prioritize safety. However this is a fairly simple task. It can be the difference between a secure and secure home or an insecure open window! If you have any concerns or would like to speak to a specialist about replacing your window handle, call Bridgewater Glass. We have a team of highly experienced and knowledgeable experts who can assist you with any problems you might be having.