Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

Cleaning and lubricating regularly upvc window repairs near me windows and doors is crucial. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double glazed window repairs near me-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the door and the window is significant, you may need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sliding. A sagging window can cause problems with light, draughts and even security. It's important to take action when you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need to open the window so that you can access the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. Often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and then perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be put on. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be repaired by an upvc window repair near me window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in the breeze. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. Changing a window hinge is essentially a simple process, but it's simpler when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue could be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to provide assistance.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window repair operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear can become misaligned, this will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be required to realign them. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be positioned on the top of your windowsill. These will keep your home warm by blocking out cold air.

With a little maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than fix them. So, if you're having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.