Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism faulty? Maybe the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

You'll be wasting energy in the event that your double glazed repairs near me-glazed doors fail to function properly. This also increases the chance of burglary. Owen the Locksmith will be able to repair your door lock for reasonable costs.

Snapped Key

When a key snaps off within a lock, it can be incredibly annoying. It could also be a security problem because it could leave you vulnerable to a burglar if the door does not lock. There are a few quick fixes you can make to repair the issue and make your door functional again.

The first step is to remain calm. If you panic you may end up pushing the broken key piece further into the lock.

Then spray WD-40 or another penetrating oil into the lock to make the broken piece to slide out more easily. You can also make use of a screwdriver to break pieces that could be hindering the flow. If you have a piece of the key that is still sticking out then grab it using a paperclip or another thin metal object and pull it. Both methods work well, but be careful not to push the broken piece of the key deeper into the keyway.

Some paperclips have grooved edges that can serve as hook extractors, and some jigsaw blades are also suitable for this use. If you don't have any of these handy, you can make use of needle-nose pliers that bend to create a hook. Also, a pair tweezers is a good way to grip and remove the remaining bit of the broken key.

If you're unable to pull the broken piece of key out, you can try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these methods seem to be helping, it might be time to call a locksmith. The experts at Fitlocks can quickly fix problems such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms to ensure that they are easier to operate. Book a double glazing repairers glazing repair with us online, or give us a call to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an extremely risky security issue. It's fortunately a simple repair for an expert locksmith to complete. To fix the cylinder locksmiths must tap it. They can do this using a hammer or other tool, but the most efficient way is to use a long match or a piece of wire. Place the match or wire's end close to the keyway. The locksmith can then strike the lock to break it. This is better than using the hammer, which could damage the lock.

Overheating is the primary reason behind cylinder heads cracking. This can happen when the block and the cylinder head are made of different metals like cast-iron and aluminium. Different metals can heat up and cool off at different rates. This could cause localized hotspots to expand quicker than the rest of the cylinder.

Corrosion is another possible cause of cracks in the cylinder. If the head and block of a cylinder are not maintained correctly they may be corroded or rust and cause them to expand more than they would normally. This can cause cracks in the future.

If your uPVC window or door lock is rigid and requires more pressure to turn, it could be due to a variety reasons. A malfunctioning locking mechanism, misalignment, or a worn handle are common causes of this issue.

Fortunately it's a simple and inexpensive fix for most homeowners of double glazing repairs glazing. A professional locksmith should be able solve this problem within an hour after arriving at your residence. They can replace the locking mechanisms, or change the window handles and replace the gearboxes, depending on your specific needs. A locksmith with experience will always be able to advise you on the most cost-effective options for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that offer an additional layer of protection against burglars. It is a small cost to pay for the peace-of-mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks may break. They have intricate mechanisms which deteriorate over time. If yours fails it's difficult to identify the cause of the issue. Make sure you fix it correctly.

The issue could be related to the locking mechanism inside or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you to stop drafts. It can be expensive to repair double glazed window or replace your handle if it is not done correctly and could also harm the frame and the lock of your door.

With the window open, loosen the screw that secures the handle using a screwdriver. The screw should be located on the inside of the backplate, usually concealed by an eye-catching cap to conceal it to enhance the appearance. You should not lose any internal components of the handle like the plates and levers on either side. Keep them in the same order so that it is easier to replace if necessary.

Next, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw on the back of the handle which holds it to the internal spindle by using another screwdriver. Once the screw is removed, you should be capable of pulling the handle off and take out the broken spindle. Replace it with a new one, making sure it's the same length as the old one (you can typically find these online or in hardware stores) and screw it securely into the correct position. Do not overtighten the screw as this could damage the handle and the window frame.

Close the handle and try it. It should function smoothly and you'll be able open your window after a few times.

While you're working on the handle, be sure to check your uPVC windows are shut correctly. If they're not closing properly cause damp and draughts inside your home as and also affecting your home's energy efficiency. Core Sash Windows is a local window company that can adjust the hinges on your window frames to ensure they close correctly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is especially common in uPVC tilt and turn windows. These types of windows require a handle which operates a locking mechanism in the window frame. The handle is connected to a central rod which is then activated by a series of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism is not able to open after the handle is turned, it is likely the spindle is damaged. This can be a frustrating problem.

There are solutions to this problem. A good locksmith will be able to quickly and efficiently repair this problem. A reputable locksmith will be able disassemble the window's handle using a tool to take out the wheel from the area that houses the spindle. This is done without damaging the handle or causing other damage to the window frame.

Once the wheel is removed the technician can then inspect the spindle to determine what caused it to break. This involves disassembling the spindle and inspecting each component part, noting any damage or excessive wear. This process is usually performed by technicians in an environment that is clean.

Then, clean the damaged spindle. This will remove any dirt or other debris that may be obstructing it from operating normally. The spindle could be replaced or repaired. If it's being replaced, the technician could use an identical dowel size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle cannot be repaired, it might need to be replaced entirely. Home centers can sell generic replacements but if the window design is unique, you will have to speak with a cabinet maker or woodworker who can make the exact component. Once the spindle has been installed, it is fixed to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the new handle is firmly in place, you'll be able to operate your uPVC window.