Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair upvc window.

Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. However when windows with double glazed repairs near me panes are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers that will aid the new pane in being able to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they are susceptible to a range of problems including sliding. A window that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC Pvc window repairs watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do an initial fitting. The joint at the corner of the sash window repair must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage originates from the glass of your double glazing repairs glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation at the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges, also because of wear and tear, can become misaligned, this will cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it may be necessary to have them aligned or replaced. Second, the interlock can be unbalanced. This happens on the hinge side and could require to be cleaned. In some instances it might be necessary to replace them.

These seals can wear down or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than repair double glazing windows them. So, if you're having issues with your upvc windows, it is best to seek professional assistance as soon as you can.