tilt and slide patio door repairs (pop over here)

A tilt and slide patio door that works well brings light and fresh air into your home, and allows for effortless moving from indoors to outdoor. Modern aluminum doors provide strength and durability as well as thermal integrity, and an array of glass options to fit the various aesthetics.

One of the most common problems for sliding doors is dirty tracks and rollers. Regularly cleaning and lubricating moving parts will keep your sliding door in good order.

Track and Roller Replacement

The track and rollers are essential for sliding doors to function. They are located at the bottom of a door made of aluminum and are seated on a raised track which guides them when they open and close. Over time, dirt can cause the tracks to become clogged and cause the rollers to be damaged. Keep your patio door frame repair door lubricated and clean to avoid these issues.

Unless your track is severely bent, it's usually possible to fix the track and rollers without completely removal of the door. Get a helper and then tilt the panel towards you to lift it off the track at the bottom (Photo 3). This may require some effort because the panels are heavy. After the panel has been removed, lay it flat on sawhorses and examine the rollers. If they're damaged, replace them with a new assembly. You can alter the height of the rollers by turning the adjustment screws, which are typically located in slots that are located along the edges of the panel.

If the rollers look in good shape they might just require to be cleaned and lubricated. Use a screwdriver for removal of the rollers, then wipe each one with denatured alcohol. This will get rid of any grime or dirt that may be causing the resistance. After carefully putting each roller into its slot and then fully retract it using the adjustment screw. Finally, lubricate the rollers with a silicone spray. This type of lubricant doesn't accumulate dirt like petroleum-based products and will let your door move effortlessly.

After cleaning and reinstalling rollers, you can install and test the door to make sure that the track is properly aligned with the rollers. Also, ensure that the doors move smoothly. Contact an authorized dealer in your area if you need assistance. Keep your doors clean and lubricated to extend their life and reduce the need for repair. We recommend a silicone-based lubricant because it won't attract dirt the way that WD-40 does. It is recommended to grease your rollers and tracks at least once per month.

Insect Screen Replacement

sliding patio door repairs patio door are great to maximize floor space, create airflow and let in stunning panoramic views. However, they can be difficult if their mechanism ceases working or is not working correctly. Fortunately, most issues with sliding screen doors can be easily resolved. Dirty rollers caused by debris in the track or a wrinkly screen are typical causes however, you can repair them by following these easy steps.

If your screen is sagging or wrinkling, you should first lay the frame on a flat work surface and slide a 1x4 block underneath each end to create a slight bow in the middle. This will allow you to pull the screen tightly and straighten it.

Buy a screen that's at least two inches bigger in both directions than the opening of the frame. You'll be able to reduce any excess. Also, make sure to press the one end of the rubber spline into your channel using the spline rolling tool. Once you have done this, it is time to insert the remainder of your spline.

Adjusting the Panel

In contrast to traditional sliding doors that open by turning the handle, tilt and slide patio door mechanisms permit you to leave the doors wide open for ventilation while keeping your children and pets away from your home. The doors require more force to open than you think. In time this can result in more friction and crooked tracks, or misalignments, which could cause the door to not function as it should. Early detection and minor adjustments are often able to solve these issues, thereby reducing the cost of replacement hardware.

The first step for adjusting a tilt-and-slide patio door is removing the panels. Place it on a flat surface. After removing the panels make use of a screwdriver to remove the plastic caps from the holes of each adjustment roller. After the plastic holes are removed, you can use a long shafted screwdriver to pull the adjuster out of its channel. Once the adjuster is removed from its channel, place it on an even surface and scrub it using rubbing alcohol or a stronger alternative such as denatured alcohol. This will remove any dirt that could be causing resistance and allow the roller to retract easily into its channel once the process is completed.

When you reinstall the moveable panel in its frame and use the drill to drive the screws across the flange. The flange should be secured tightly to the door's edge while making sure that the flaps align correctly. After the movable panel has been put in place, apply a small amount of silicone-based lubricant to the top track arm connector block and the lead Bogie wheel, and the slave Bogie wheel, and then replace the plastic hole caps.

Repeat the procedure on two additional movable panels to restore their slide function. Then, install the plastic flanges. Using a plastic adhesive, glue the jamb-side strip to the fixed panel. When the glue is dry, reattach the handle and test for smooth operation. If there are any issues, you can adjust the lead Bogie wheel by taking it out of its channel, cleaning and reinstalling it with a bead of silicone-based grease.

Charley Bar Installation

A patio sliding doors repair door can be an efficient way to let your pet inside and out of your home, however it also serves as an easy entry point for burglars. Put a pin lock on your patio door, or a charley-bar for added security. These locks provide a blend of security and convenience that is unparalleled by any other product on the market.

The Charley bars are an excellent option for your sliding door and can be installed easily at home. The charley bars are placed in the middle of the door to avoid the patio door being jimmied with objects or tools like a hockeystick or the handle of a broom. The charley bar is constructed of injection-molded polycarbonate, and extruded RPVC telescoping tubes which makes it sturdy and durable.

The installation of the charley bars requires that you first take a measurement of the length of the bar from the edge of the sliding door track all the way to the sliding patio door. Then, you can mark the points where the charley bar will be installed using a pencil. Use a drill bit of 8 inches to create the holes in the wall jamb and the frame of the patio door, being cautious not to cut through the glass of the patio door. Then, you can put the screws that came with the charley bars and tighten them securely.

The charcoal bars are a great choice for sliding glass patio doors or sash windows. This simple security device will keep your patio sliding doors tamper-proof and burglar-proof for years to come. It is made from injection-molded polycarbonate and has been tested by Intertek to withstand more than 400 pounds of pressure. The charley bar can also be lockable using the key that comes with it. It's easy to put it up and hangs out of the way when not in use. Most hardware stores carry the charley-bar. If you want a charley-bar that works, purchase it from an online retailer.